Exhibition

System composition of wire drawing machine

The drawing motor of the drawing machine adopts S011Z3 inverter, and the winding motor adopts S004G3 special winding inverter (the external braking resistor uses the operation command and output frequ

Daily maintenance of wire drawing machine

⑴. Keep the outside of the wire drawing machine clean and hygienic, and check whether the gas supply pipeline and quick connector are in good condition. ⑵, the upper and lower bearing seats and the l

Operation requirements of wire drawing machine

The wire drawing machine starts the synchronization requirement of speed increase during the operation, and the tension needs to be kept constant during the operation. When the whole equipment is stop

Main structure device of wire drawing machine

The high-speed wire drawing machine can be used to draw various metal wires. As a commonly used wire drawing equipment, its main electrical drive parts include a drawing motor, a wire take-up motor an

Steps for frequency conversion control debugging of inverted wire drawing mac...

The inverted wire drawing machine requires reasonable debugging during operation to ensure that the wire drawing operation can be completed smoothly. After using the inverter, in the process of debugg

The inverted wire drawing machine has good safety

Pull the inverted wire drawing machine to the take-up wheel, start the take-up machine, and start the drawing process during operation. During operation, you need to rotate the switch to the linkage s

The influence of the cooling system on the performance of the water tank wire...

During the operation of the water tank type wire drawing machine, a good cooling effect must be ensured. In fact, the temperature of the lubricating fluid is too high, resulting in a decrease in the l

Main device and system composition of wire drawing machine

The high-speed wire drawing machine is mainly used for drawing metal wires of different specifications, and the electric drive part is composed of a drawing motor, a wire take-up motor and a wire arra

High efficiency and energy saving of water tank type wire drawing machine

The temperature of the cooling water in the sealed chamber of the water tank type wire drawing machine is too high, exceeding 40 degrees during use, so that the sealed chamber will not have the requir

The reason why the surface drawn by the wire drawing machine is oxidized

The temperature of the cooling water in the sealed chamber is too high, exceeding 40℃, so that the sealed chamber will not be able to achieve the required cooling effect on the metal wire, resulting i

High efficiency and energy saving of wire drawing machine

The wire drawing machine can also save energy and electricity when in use. We can use a product called an electromagnetic heater, as long as the surface of the wire drawing machine barrel is wrapped w

Good fire resistance of water tank type wire drawing machine

In the process of using the water tank type wire drawing machine, its wire drawing is a newly introduced surface treatment process. To a certain extent, it is mainly based on aluminum plate, which wil