Home > Exhibition > Content

Maintenance of wire drawing machine

Sep 13, 2020

In the field of industry, wire drawing machine is one of the frequently used mechanical equipment. The daily maintenance of the wire drawing machine mainly includes: the overall cleaning and cleaning of the equipment, and the inspection of the pipeline, wiring and joints, etc., whether there are problems, etc.; the lubrication maintenance of the equipment, and the inspection of the lubrication, whether they are in good condition Lubricate this standard. On the abrasive belt, it is mainly to check whether its balance is good, and if it is not good, some appropriate adjustments should be made.

Weekly maintenance of the wire drawing machine is based on the daily maintenance work, adding some content, such as checking the conveyor belt and its tension, and other things. Therefore, from the perspective of scope and work content, weekly maintenance needs to be carried out more, so its importance is more obvious.

The system used in the wire drawing machine has very high and strict requirements for speed control. For example, the system is required to provide high accuracy and smooth line speed. Moreover, in the drawing of certain materials, the requirements are more stringent than ordinary wire drawing machines. Therefore, in the motor of the wire drawing machine, the coordination between the motors is required to be very good.

In order to meet the above requirements, the motor can be used to drive the wire row through the driver, and the wire row position can be calculated by the controller, so as to minimize the wire row delay, which can achieve the goal. In this way, the service life of the equipment can be prolonged, and the work efficiency and effect can be improved, and its benefits can be maximized.

The automatic wire-arranging compensation controller of the wire drawing machine is mainly used in the occasions where the flatness of the wire is relatively high. It has been convenient for the lower wire to be laid out or twisted without wire clamping. This wire-arranging controller can be used with any brand of The small water tank drawing machine and micro drawing machine are matched, and it is applied to the metal drawing industry such as copper wire, aluminum wire, stainless steel wire, brass wire, copper clad aluminum wire, enameled wire, etc.