Before installing the inverted wire drawing machine, you must first select the appropriate position, and then place the equipment we selected on a stable ground, and then install it according to the instructions. First, use the appropriate expansion according to the foot hole of the machine base The screws are fixed on the pre-laid cement foundation to fix them. Then check whether the equipment can maintain a stable state, and whether all auxiliary equipment is complete. When tightening the equipment, pay attention to adjust the position of the host to ensure that the center of the reel and the center of rotation of the trolley are in the same position. At the same time, pay attention to that when adjusting the host, it should be ensured that the trolley can keep smooth during the forward and backward movement.
In addition, it is necessary to properly connect the electrical circuits of the equipment according to the requirements of electricity consumption to ensure that there is no leakage or short circuit. With the continuous development of technology and technology, people have higher requirements for the process quality of various metal products. At the same time, as a kind of commonly used equipment, its technological level, product quality, output and variety have also made great progress.