Home > Exhibition > Content

Analysis of common problems in drawing process of wire drawing machine

Oct 14, 2019

When the drawing machine equipment is being pulled, if it is affected by bad factors, it is likely to have some abnormal problems. Of course, different influencing factors will cause different problems in the drawing machine equipment. Next, we will select a few common problems to introduce, and hope to help everyone.

In the drawing work, the problem we may encounter is the “ear” yarn. The reason why there are such problems mainly includes three reasons: 1. The circle is mainly due to the unreasonable position of the wire drawing machine or the clustering. The spacing between the plate slots is too large; 2, the product bundle is too large, the yarn quality is too soft; 3, the winder shuttle swaying seriously; 4, the original silk crease injury. The second problem is the side yarn. The main problem is that the operator uses too much force when cutting the wire, or the silk cake hits the edge of the yarn during the drying process.

The third problem is called wool yarn, which mainly includes four reasons, namely: 1. The oil coating effect is not ideal; 2. The tension is too large during the production process; 3. The cable and the bundler are damaged; 4. Winding Involved in. The fourth problem is called split yarn. The main performance is that the tow drawn by the wire drawing machine has changed from one to two. The reason why this problem occurs is probably because the tow is not put in the car. The wire shuttle, or the tension during the drawing process is too small, resulting in a job change.

The fifth common problem is called fouling, which means that the surface of the drawn wire is dirty. The main reasons include: 1. rusting water splashes on the yarn; 2. oil leakage from the wire drawing machine; 3. cooling plate The joist has been used for a long time, and the aging problem is serious. 4. After the oil roller is wiped, it is not cleaned up in time; 5, other accidental reasons.

Of course, in the work of drawing machine equipment, there may be many other problems, and the main share is only part of it. But no matter what kind of situation, I hope that everyone can take it seriously and take corresponding measures to avoid these problems.https://www.chinawiredrawingmachine.com/