First of all, let's learn how to do a good job of quality control of aluminum wire tank type wire drawing machine. The specific contents include: 1. The aluminum rod should be carefully checked before getting on the car, and the aluminum rod used must be quality checked. The product inspection is deemed to be a qualified product; 2. The aluminum rod welding should be smooth and firm; 3. The staff should be patrolled frequently to check the quality of the product.
If it is found that the produced product has abnormal problems on the surface, the aluminum wire water tank type wire drawing machine should be adjusted in time according to the actual situation. If it is insufficient lubrication, the lubricating oil should be added in time. In addition, during the drawing process, it should be ensured that the cable is neat, keeping the speed of the cable and the speed of the first line of tension consistent. If the drawing drum is found to be worn, it should be replaced between the inside and outside. If both sides are worn, replace the new drawing rim.
Then, after the completion of the production task, how should we handle the aftermath? The staff member shall hang the qualified label that meets the requirements on the qualified product and stack it neatly according to the designated location. Close the aluminum line water tank type drawing machine as required, clean up the work site, wipe the clean equipment, and make the handover record.
In the case of succession, it is usually necessary to ensure that two staff members face-to-face handover and sign the handover record. Among them, the content of the handover must include at least these items: the abnormal condition of the operation of the aluminum wire tank type wire drawing machine, the lubrication condition, the change of the original defect, the change of the operating parameters, the failure and the treatment situation.https://www.chinawiredrawingmachine.com/