As we all know, the equipment of inverted wire drawing machine is more and more widely used in the current industrial field, because it has many advantages. In practical applications, however, some noise may be generated during the operation of the inverted wire drawing machine. These noise will cause obvious interference to the working environment of the site, so what measures can reduce the noise?
In view of this problem, there must be a lot of manufacturers are more concerned about it. In fact, during the operation of the inverted wire drawing machine, the noise generated will cause noise pollution to the work site. The more serious noise is the meshing noise when the gear is running. Usually, if the gear meshing surface of the equipment is worn seriously, or the assembly side clearance of the gear is too large, it may cause a greater noise.
In this case, we must take effective measures in time. Therefore, during the use of the inverted wire drawing machine, it is necessary to adjust clearance of the gear pair regularly to keep it within the appropriate range. At the same time also pay attention to doing the relevant lubrication nursing work to reduce wear. In addition, if the casing of the equipment is loose, it will also produce some noise.
Therefore, for different reasons of noise, we need to take corresponding measures to solve the noise. For example, in the operation of the inverted wire drawing machine, especially after the completion of the wire drawing, in the taking up process, the take-up device may also emit serious noise. If encountering such a problem, then we need to change the polyfluortetraethylene plate in time as the pad, so as to effectively reduce the noise.
In addition, the personnel operating at the scene can bring the protection tools in advance, so that the damage caused by the noise of inverted wire drawing machine can be reduced appropriately.