For the water tank type wire drawing machine, the most critical setting in the winding should be the deployment control, and the use efficiency of the device, because this will directly affect the quality of the entire wire of the water tank type wire drawing machine, then For the related problems on winding, there are mainly the following effective control methods:
1. First, it is the roll modulation that accepts the tension. In the winding of the entire water tank drawing machine, the tension is mainly determined by the tension roller itself and the assembly setting;
Second, the torque control is adopted. The tension during winding is mainly determined by the size given by the torque, but due to different changes in the winding diameter, the water tank type wire drawing machine appears on the winding line. The unyielding phenomenon of tension;
3. Finally, if it is a water tank type wire drawing machine with relatively high technological requirements, under normal circumstances, the first control method is more often selected, mainly using the ACS510 inverter or the PID correction function. The entire tension roller is modulated and controlled.