Home > Exhibition > Content

Detailed operation of inverted wire drawing machine

Dec 09, 2020

The main content of the inverted wire drawing machine in safe operation:

1. Whether the different lubrication points are completely lubricated, whether the pressure of the water path and the air path are normal, and whether the wire drop frame on the trolley is complete;

2. After connecting the power supply of the equipment, turn on the main AC motor, and then ensure that the inverted wire drawing machine can run for a period of time without load, which is convenient for detailed inspection of the equipment;

3. For the host in the inverted wire drawing machine, it should be started slowly, and then the speed can be gradually increased to reach the final normal operating speed;

4. During the entire operation, the operator must wear corresponding protective gloves to prevent it from causing burns to the human body or affecting the product in an appropriate amount;

5. When the inverted wire drawing machine is pneumatic, check the belt swing. Once the problem is found, it should be solved and dealt with in a timely and effective manner;

6. During the operation of the inverted wire drawing machine, the operator should not stand at the front exit of the wire drawing machine to avoid the workpiece flying out and causing harm to the human body;

7. When the same inverted wire drawing machine is working, the pressure of the work must be closely observed, and it must not exceed the red line to avoid accidents;

8. During the operation of the wire drawing machine, it cannot be overhauled. If the inverted wire drawing machine does not need to be used for a long time, it is best to turn off its total power.

https://www.chinawiredrawingmachine.com