Before starting the water tank type wire drawing machine, the staff must conduct a series of inspections, especially pay attention to the oil level, air pressure of the equipment and the tightening and lubrication of the spool take-up machine, and make timely adjustments. In addition, check whether the safety protection device of the water tank type wire drawing machine is complete. If there are any problems, they should be dealt with in time. To
After confirming that there is no problem with the water tank type wire drawing machine, the staff should also place the billet spool on the pay-off machine as required, and then turn the handle of the pay-off valve to tighten the top of the spool. It should be noted that before the rolling head, it should be checked whether its specifications match the matching mold. After that, the molds must be worn one by one in order, and finally the steel wire must be introduced into the finished reel or spool take-up machine.
Then debug the water valve to fill the water tank of the water tank type wire drawing machine with soap liquid, and then close the water valve in time. In addition, before starting the spool take-up machine, you need to check whether the air pressure is abnormal. After confirming normal conditions, the spool can be installed, and then close the safety door of the spool take-up machine. Then adjust the electromagnetic speed control knob to the middle and low speed position, and then slowly adjust the operating speed to the normal state.
During the operation of the water tank type wire drawing machine, the staff need to pay attention to the operation of the equipment. Once any problems such as water leakage, oil leakage, abnormal sound, or uneven take-up are found, they should stop in time for inspection and solve the problem. Only then can the equipment be turned on for production, and then you also need to follow the above steps.
The above content is to introduce you to the specific process of correct operation of water tank type wire drawing machine equipment. I believe that through this study, everyone has mastered the method of correct operation of water tank type wire drawing machine equipment. I hope that users and friends can learn more in the future. Use the device well.