Home > Exhibition > Content

Operating procedures and maintenance regulations after inverted vertical drawing machine

Oct 04, 2019

When turning off the inverted wire drawing machine, we need to follow the normal operating procedures to shut down the device. After the equipment is completely stopped, the staff needs to use the cleaning tool to wipe and maintain the equipment, and the equipment machine and the on-site working environment should be cleaned. The site should be cleaned according to the ā€œ6Sā€ standard.

If the equipment is stopped due to sudden power failure during the normal operation of the inverted wire drawing machine, the staff should turn off all power in time to avoid accidents. In addition, everyone needs to be reminded that if the staff needs to leave the work site, they also need to turn off the equipment and cut off all power.

In addition, when using the inverted wire drawing machine equipment daily, we also need to carry out maintenance according to its maintenance regulations. The main contents are as follows: 1. Regularly check the wear condition of the drawing wheel and the pressure roller, and check whether the connecting bolts of each component are tightly fastened; 2. Regularly check the oil level of the lubricating oil in the gearbox, and ensure the lubricating oil. Adequate; 3, regularly check whether the electrical line connection is intact, if there is aging problem, it should be replaced in time.

The above is the operating procedure and maintenance requirements for the inverted wire drawing machine for everyone. I hope that the users and friends can better protect the equipment when using the inverted wire drawing machine in accordance with the above requirements.https://www.chinawiredrawingmachine.com/