Home > Exhibition > Content

Inverted wire drawing machine operating status and power connection

Mar 29, 2019

The inverted wire drawing machine is mainly used for continuous and non-twisting operation of the heavy plate because it can complete the drawing and winding work at the same time, which simplifies the operation process. Under normal conditions, the device can draw high, medium and low carbon steel wire, and can also draw shaped steel wire, stainless steel wire and thick and thin colored wire.

The inverted wire drawing machine has a very outstanding effect especially in the drawing standard product and the shelf manufacturing industry. The drive system of the device consists of a strong narrow V-belt and a standard reducer drive. The main components are double enveloping worm gear pair, cycloidal pinwheel reducer, planetary reducer, hard tooth reducer and so on.

The inverted wire drawing machine is connected to the appropriate power source as required, and then the AC main motor is turned on for a period of testing before the wire drawing die is placed in the mold box. Then insert the wire into the mold and press it tightly, then hang one end of the wire on the roll, rotate the wire slowly for ten to twenty turns, pull the wire from the roll of the inverted wire drawing machine, and then close. Remove the wire cutter for the rear operation. Note that the returned wire should be placed in the drop rack.

The inverted wire drawing machine must closely observe its operating state to avoid accidents. When the line is full, it can stop. At this point, the pressure roller and the pawl are released, the cart is activated, the wire is suspended in the wire frame, and then pushed into the cart. This process can be repeated.www.chinawiredrawingmachine.com