The inverted wire drawing machine belongs to the steel wire drawing machine when it is operated. It is mainly used for the drawing work of metal wire during use. The equipment adopts the vertical downward working mode of the reel, and can be continuous in one operation during operation.
Pulling 1-3 tons of wire, the finished product directly falls into the take-up reel, which facilitates deeper processing at a deeper level. The device has the dual functions of drawing and winding, and is suitable for various non-ferrous metal wires such as high, medium and low carbon steel bars and special-shaped steel wires.
Oil mist lubrication device for inverted wire drawing machine
The oil mist of the inverted wire drawing machine mainly refers to the oil particles suspended in the high-speed air jet airflow during operation.
The oil mist lubricating device introduces dry compressed air from the compressed air line into the oil mist generator, and uses the compressed air carrier to use the venturi and eddy current effect to atomize the lubricating oil into fine oil particles suspended in the high-speed air jet stream and The oil mist is delivered to each lubrication point.
Pneumatic device for inverted wire drawing machine
The pneumatic device of the direct flawless wire drawing machine and the roving wire drawing machine consists of an air pressure switch, an air pressure regulating valve, a solenoid valve, an execution cylinder and a pneumatic pipe fitting.www.chinawiredrawingmachine.com