During the operation of the water tank type wire drawing machine, effective measures should be taken in time for some emergency situations. Operators should first be familiar with the location of the emergency stop button. When a personal or equipment injury accident occurs that requires an emergency stop, they should immediately press the emergency stop button, properly handle it according to the safety plan, and report to the leader on duty. Note that emergency parking is very harmful to the equipment, it can only be used when personal safety and equipment safety are endangered, and it is strictly prohibited to use it in the normal power-on state.
In order to ensure the safe operation of the water tank type wire drawing machine, on-site operators should be familiar with the location of fire extinguishers and fire water tanks, and use fire extinguishers and fire hydrants correctly. When a fire occurs, use fire extinguishers and fire hydrants to extinguish the fire in the shortest time and report to the leader on duty. . Remember, non-operators at this position are not allowed to operate this machine without approval, and no one is allowed to dismantle or relax safety protection devices at will.
The jog switch of the water tank type wire drawing machine should be kept in good condition, and should be placed in a suitable position if it is not used temporarily to avoid false triggering. When using the piercing machine, do not put your hands on the rotating part of the piercing machine, nor on the roller of the piercing machine, and turn off the power supply in time after the piercing machine is used. Wear protective glasses when connecting to prevent sparks from flying out and hurting people.
During the operation of the water tank type wire drawing machine, lubrication, maintenance, or debugging are not allowed, and nothing and sundries are allowed to be stored on the equipment. Beware of getting involved in the equipment and causing accidents. It is forbidden to use reels with loose or damaged cores. When loading the coil, the thimble should be firmly pressed, the safety pin should be tightened, and the protective fence should be closed before driving. It is forbidden to stand before and after the take-up coil.
When changing the reel, make sure that it can be operated after the water tank type wire drawing machine is completely stopped. Take protective measures when placing the reel and see if there are any people or objects in front of it to prevent accidents such as crushing. When the wire drawing machine is turned on, if there is an open flame caused by friction, it must be extinguished by hand. If it cannot be extinguished by hand, you must stop and cut off the power first, and then use a fire extinguisher to extinguish the flame at the root of the flame. It is strictly forbidden to use water to extinguish to prevent Electric shock.