Do you know what check work should be done before turning on the copper wire drawing machine? As a user, we must keep these basic questions firmly in mind. Then we will share the content to everyone, hoping to provide some reference.
First of all, before turning on the copper wire drawing machine equipment, the staff needs to carefully check whether the lubrication of the running parts of the equipment is good or not and whether the protective cover is reliable or not. And whether there will be blocked by foreign body or not. If the lubrication is insufficient, lubrication should be carried out in time. Secondly, pay attention to whether the connecting bolts on each part loose or not. If the connecting bolt loose, it must be fastened in time.
Particular attention should be paid to checking and confirming the safety and reliability of the electrical devices and protective devices. Each button on the device is sensitive and reliable, and the reset stop button is in good condition. In addition, you should also check the equipment for leaks or leaks.
Thirdly, we need to check the cleaning situation of the work surface and various parts of the copper wire drawing machine In particular, pay attention to check and confirm whether the electrical installations and protective devices safe and reliable or not. Make sure that the above buttons are sensible and reliable and the reset emergency stop button is in good condition. In addition, you should also check whether the equipment leak water and leak oil or not.
Fourth, we also need to pay attention to check whether the air pressure of the gas path part in the system is in a normal range or not and whether each pneumatic valve is sensitive and reliable or not. It should be noted that we should also check the electrical parts of the copper wire drawing machine in time to ensure the normal circuit.
In addition, before turning on the copper wire drawing machine equipment, it is necessary to pay attention to whether the drawing liquid and lubricating oil are good or not. If there is deterioration, we should change it in time.
These points above are the check work which must be done before turning
on the copper wire drawing machine. I hope that everyone can operate the
machine according to the requirements.
Wuxi Wandeshun Machine Co., Ltd
Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China
Tel:86-510-85260990
Mobile:86-13921534531
86-13806184032
86-13915322227
Fax:86-510-85261990
Email:sales@wxwds.com