Home > Exhibition > Content

Straight through wire drawing machine process optimization measures

Oct 13, 2018

In order to further improve the surface quality of the wire rod, in the process of running the straight-through wire drawing machine, the staff first needs to check the viscosity of the lubricant regularly. If the viscosity of the lubricant is too large, the fluidity is poor, indicating that too much impurities in the lubricant will affect For the lubrication effect, effective control measures should be taken in time, and the amount of lubrication should be given according to the situation to ensure that the wire is sufficiently lubricated.


At the same time, the appropriate mold should be selected, which not only improves the production efficiency of the straight-through wire drawing machine, but also ensures a sufficient safety factor and reduces the yarn breakage. Moreover, in the process of drawing, the metal can be subjected to normal plastic deformation, and the drawn wire can reach the required size and shape with good surface quality.


That is to say, if you want to optimize the drawing process of the straight-through wire drawing machine, then we must turn on the lubricating fluid throughout the process of wearing the mold. At the same time, according to the design of the annealing part of the specific drawing equipment, the theoretical value of the annealing voltage and current should be calculated, and then the drawing work can be carried out in combination with the specific working experience. Avoid excessive or too little annealing caused by experience, which affects production efficiency and product quality.https://www.chinawiredrawingmachine.com/