Home > Exhibition > Content

Small copper wire drawing machine equipment handling requirements

Aug 29, 2017

For small copper wire drawing machine equipment, the handling process is only one of the small operation of the link. However, the need to pay attention to the problem is still more, in order to prevent the handling process, equipment damage, the entire handling process must be carried out as required. First of all, in the small copper wire drawing machine equipment before packing, should be in the rust part of the appropriate amount of anti-rust oil.

Copper and Aluminium Wire Drawing Machine

After the use of thin oil paper will be small copper wire drawing machine equipment wrapped in order to carry out packing. In the process of packing, should pay attention to support plate and pressure plate to be reliable. It should be noted that in contact with the equipment should be padded with a thick layer of wool felt, to prevent equipment bumps. In addition, should also be placed in the box the right amount of moisture-proof sand. Secondly, in the process of lifting, but also must ensure that the box tied.

Only in this way, only in the process of lifting, it will not appear excessive impact and shaking, so as to prevent small copper wire drawing machine equipment damage, and should pay attention, not the container rewind. In the unpacking, the handling time, you can divide the device into two parts for handling, that is, two parts of the machine and the bracket.

In the handling of small copper wire drawing machine equipment, two people can be together to complete, one of them standing in front of the machine, the other person is standing on the machine buckle, hand to catch the cylinder, forced to lift up. Need to remind everyone that, before moving, should be the first machine and the bracket is connected between the components.

In addition, when handling small copper wire drawing machine equipment bracket, you can use the rope to connect the parts together. But be sure to ensure that the rope is secure, and in the rope and stent friction parts should be padded with a thick layer of wool felt, so as to avoid the paint fire is damaged machine.


Wuxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

    86-13806184032

    86-13915322227

Fax:86-510-85261990

Email:sales@wxwds.com

Website:http://www.chinawiredrawingmachine.com