First of all, according to its working principle, we know that when the wire drawing machine is working, there is a program that needs to be heated. When the barrel is heated, it actually uses the heating ring to work, and this way of working results in more electricity.
It is necessary to heat the heating ring to a state of heat, and then transfer it to the barrel through it, which is a process of heat transfer. Therefore, in this transfer process, part of the heat will definitely be unusable and wasted. Obviously, the wasted heat is actually from electrical energy.
In addition to a part of the heat loss during the transfer process, the surface of the heating ring will also be in contact with the air, so part of the heat is absorbed by the air, which is also a waste of electrical energy. According to statistics, when the wire drawing machine is running, the heat loss is only about 40% in the heating circle during the heat transfer process. If the waste of electricity in this process can be effectively avoided, the purpose of energy saving is achieved.
In order to achieve the purpose of saving electricity, what we need to do is to wrap a layer of thermal insulation cotton on the surface of the drawing machine barrel, and then add an electromagnetic heating coil. After the power is turned on, the electromagnetic plus coil generates electromagnetic induction, and the barrel automatically heats up. The thermal insulation cotton can prevent the heat from running into the air and save at least 30% of the electricity.