First of all, all relevant staff should be fully prepared in advance, such as careful review of drawings and technical information, familiarity with and knowledge of the knowledge points, so as not to cause batch scrapping or waste. When using the wire drawing machine equipment for wire drawing, the staff needs to ensure that the drawing direction, working condition and wire drawing quality of the equipment meet the requirements. In addition, you should choose the right belt.
It should be noted that some staff members lack sufficient awareness and often overlook some detailed problems during operation, such as not wearing gloves, which may not only affect the quality of processed products, but also more important. It is also likely to cause some harm to ourselves. In addition, the workpiece must be cleaned before drawing, and the wire drawing machine must not be used directly for drawing.
When the product is processed, it should be properly stored and packaged to avoid surface damage. It is also necessary to clean up the work site in time to ensure that the wire drawing machine equipment can still operate normally next time. During routine maintenance, care should be taken to keep the surface of the equipment clean and to check that the various lines and connections are normal.
The staff should regularly check the lubrication of the wire drawing machine equipment and add the lubricating oil in time. Also pay attention to check the condition of the belt and adjust it if necessary. If the equipment is found to be abnormal, it should be repaired in time.https://www.chinawiredrawingmachine.com/