Home > Exhibition > Content

Inverted wire drawing machine installation and use environment introduction

Aug 21, 2018

Do you know what the inverted wire drawing machine has for the installation and use environment? First of all, when installing, the tension axis of the wire should be symmetrical with the center line of the die hole, so that the stress of the wire and the wire die is even. Moreover, the installation foundation of the inverted wire drawing machine must be very stable to avoid vibration.


Secondly, during the operation of the inverted wire drawing machine, care should be taken to avoid frequent starting and stopping. This is because the tensile stress generated during the starting process causes a large friction, which has a great influence on the wear of the mold. In addition, the wire used for drawing is subjected to pretreatment: surface pretreatment and heat treatment.


That is to say, before the wire drawing of the wire drawing machine by the inverted wire drawing machine, all the wires should ensure that the surface is clean and free from dirt and the like. For the wire with more impurities, it must be cleaned and dried before being pulled by the inverted wire drawing machine. If there are more oxide wires on the surface of the wire, it must be finely dried and dried before drawing.http://www.chinawiredrawingmachine.com/