Home > Exhibition > Content

Inverted drawing machine for initial use

May 26, 2018

Inverted drawing machine as a commonly used drawing equipment, has been loved by many users. However, after the new equipment arrives, some checks need to be done first. Do you know which points should be noticed? As a device for drawing various wire rods, it is necessary to perform a check before use in order to ensure the smooth progress of the production of the inverted wire drawing machine.

 

Then, what problems need to be paid attention to when checking? In fact, for inverted wire drawing machine equipment, the inspection on it mainly includes three aspects. The first is to check the gearbox, especially to check if the amount of oil is adequate. In other words, we must pay attention to see if its oil level is in proper position. If too little, add supplements in time to avoid affecting normal use.

 

Secondly, it is necessary to pay attention to the fact that it is necessary to carry out a comprehensive inspection of the connection conditions of the various lines of the inverted drawing machine equipment. Special attention should be paid to whether the connections are normal, whether there are poor contact, loose or other undesirable phenomena. If any problems are found, they should be dealt with promptly. Wait until the problem is resolved before using it. In addition, check whether the various buttons on the device can be operated flexibly and whether the function is normal.

 

Finally, the overall inspection of the inverted drawing machine equipment is also included. The main contents include: whether the main components of the equipment are complete, whether the fasteners are fastened, whether the connection is normal, and whether some transmission components are in good condition. After completing these checks, you can turn on the device and let it run for a while. Note that if any abnormal problems are found during the test run, they should be dealt with promptly.

 

In general, since inverted drawing machine equipment is used more frequently in actual production, these inspections should be carefully completed to ensure that its good working performance is fully utilized. Through these inspections, it will also help us to increase our understanding of the inverted drawing machine and make the subsequent operations more smooth.http://www.chinawiredrawingmachine.com/