Home > Exhibition > Content

Copper wire drawing machine use requirements

Apr 27, 2018

In the process of using copper wire drawing machine equipment, it is necessary not only to pay attention to daily standard operation, but also to perform daily inspection and maintenance. During maintenance, proper lubrication of the copper wire drawing machine equipment should be noted. It should be noted that not only the amount of lubrication but also the quality of the lubricant must be ensured during lubrication. When selecting a lubricant, the following basic requirements must be met:


First, it has good adhesion, so that during the drawing process of the copper wire drawing machine, these lubricants can effectively adhere to the surface of the drawn wire rod, thus providing a good lubrication effect;

Second, the selected lubricant should have good thermal stability and be able to withstand high pressures between the wire and the mold.

Third, the selected lubricant must not be corrosive;

Fourth, in use, with a good cooling effect, and without any irritating odor;

Fifth, these lubricants can be easily removed at a later stage of processing.


In addition, during the operation of the copper wire drawing machine, it must also pay attention to the operation. Since the ribbon is continuously annealed during operation, special attention must be paid to this problem. In actual production, in order to solve the hidden troubles at the source, the equipment in the periphery must be strengthened. First, the volume of the medium-pull drawing oil pool should not be less than 7 cubic meters, and the medium-pull cooling oil pool can not be less than 3 cubic meters. Taiwan, the oil pool as long as possible and wide, not too deep, it is conducive to heat. In addition, the heat generated in the annealing process of the copper wire completely removes the cooling water, so that the cooling water is continuously heated. When the cooling water temperature exceeds 70 degrees, the cooling effect is not satisfactory and the copper wire will turn red. Therefore, the cooling pool must not be too small, and the cooling water must also be kept in sufficient quantity.


In addition to these problems, in the drawing process using a copper wire drawing machine, it is also necessary to ensure the quality of the wire, so as to avoid frequent disconnection due to the wire problem. Of course, we must also pay attention to reasonable control of the tension of copper wire drawing machine equipment to ensure the quality of wire drawing.http://www.chinawiredrawingmachine.com/