After the straight line wire drawing machine is installed, it is debugged. At this point, you need to carefully check that the installation is complete and check that the bolts are tight. Then, inject a proper amount of lubricating oil into the inside of straight line wire drawing machine, and check the center position through the observation hole to ensure the height is suitable. At the same time, care should be taken to ensure that there is no oil leakage in the body of the reduction gearbox.
Then, the straight line wire drawing machine is started under no-load condition. In this process, it is necessary to observe whether the running state can be kept stable, whether there is a large noise, or an obvious vibration problem. During the operation of the empty load, try to control each control button to control various actions such as starting, normal operation, and parking of the whole machine.
In order to ensure the stable and reliable operation of straight line wire drawing machine, it is necessary to select the appropriate position during the installation process and install it according to the instructions. First, according to the foot hole of the machine base, fix it on the pre-punched cement base with suitable expansion screws to fix it. Then check if the equipment is stable and whether the auxiliary equipment is complete.www.chinawiredrawingmachine.com