Home > Exhibition > Content

Stranding machine maintenance and precautions for use

Jan 14, 2017

Cable stranding machines normal operation of equipment is necessary. In order to make the product look better, better quality and minimize human losses, so we used wire machine in the process, you should do the following:

1, check compliance with actual production process requirements;

Round 2, look at the twisted appearance, press forming good perfect unit, jumper, leakage and so on;

3, check the process installed capacity to meet requirements, line intact, cable tidy.

4, check the process unit on conductor-free red, black;

5, confirm the number of processes on wires, right direction, identity integrity, rows of neatly;

6, verify the package with the packaging intact, identification and specification and process requirements.

Technical maintenance of wire:

1, host for oil lubrication, natural circulation cooling, extend spindle bearing service life. Systems using the new structure wire directly from the spindle wheel over the line to bow belt, lost due to a corner of the aluminum disk wheel failure caused by scratches and jump units. -Wire binding machine

2, machine by synchronous belt drive, no lubrication points in the machine, keep the machine clean, stranding no grease, adapted to various types of surface cleanliness requirements high line kind of conductors twisted together.

3, adjust the lay just replace a take the wheel, adjust the stranded only by flipping reversing lever, simple to operate, thereby reducing operator error rate and the intensity of work. The machine bearings use Japan brand, bows with the use of new materials, good flexibility, at high speeds to avoid vibrations caused by jumping unit, inverter, PLC, magnetic particle clutches, electromagnetic brakes, hydraulic jacks are imported brands, lower failure rates and maintenance costs.

4, the maximum spindle speed of 3000rpm.

5, automatic tension control: when the strand, taking up from the bottom increasing the take-up tension is required to receive full, the automatic tracking function adjust the take-up tension; the whole uniform winding tension, also this machine without stopping to adjust the tension. --Stranding machine

6, machine equipped with three pressure device, ensure that the conductors twisted together after the roundness, reducing the loss of insulating materials.


uxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

       86-13806184032

       86-13915322227

Fax:86-510-85261990

Email:sales@wxwds.com

Website:http://www.chinawiredrawingmachine.com