Before starting the water tank drawing machine, the staff needs to carefully read the design drawings and related technical materials, and be proficient. At the same time, it is necessary to correctly select and determine the drawing direction, the drawing surface, etc., and operate according to the specified requirements. Also protect the surface of the workpiece to avoid scratching it to avoid waste. The finished product should be handled with care and layered to prevent the finished product from being damaged.
During daily work, daily maintenance of the water tank drawing machine equipment is required: 1. The outside and the outside of the equipment should be kept clean and sanitary; 2. The gas supply pipeline, joints and abrasive belts should be inspected, the contact is good, and adjustment is needed. 3. Discharge the accumulated water in the air filter and lubricate the bearing housing.
At the same time, it is necessary to carry out weekly maintenance. For the water tank drawing machine equipment, the main contents are as follows: 1. Whether the tension of the conveyor belt and the belt is suitable, whether adjustment is needed; 2. Whether the operation of the wire drawing machine is correct, and safety .https://www.chinawiredrawingmachine.com/