Home > Exhibition > Content

Drawing process and lubricating oil road of water tank wire drawing machine

Apr 22, 2019

Before starting the water tank wire drawing machine, you should carefully check whether the fasteners on the water tank type wire drawing machine are tightly fastened and the transmission parts can be flexibly rotated. In addition, you should also check whether the lubricating oil circuit, cooling pipe and pneumatic pipe are unobstructed, whether there is leakage, and whether the electrical wiring is normal. After the confirmation is completed, the water tank type wire drawing machine can be started.

After the water tank wire drawing machine is started, pay attention to check whether there is any abnormality in the water tank wire drawing machine, if any, it should be processed in time. When the water tank wire drawing machine is in the normal wire drawing production state, the blank value should be placed under the front line cage of the pay-off frame, and then the blank wire head is introduced from the tapered inlet cage and introduced into the water tank type wire drawing machine. It should be noted that the line feeder should determine its position according to the number of wire drawing dies.

The water tank wire drawing machine produces different degrees of relative sliding between the steel wire and the reel during the drawing process (except for the finished reel), and the steel wire, the reel and the wire drawing dies are all immersed in the cooling lubricating fluid or sprayed by it during operation. It is called a water tank wire drawing machine.

The advantage of the water tank wire drawing machine is that the structure is compact, the floor space is small, the drawing density is high, the steel wire has no twisting during the drawing process, and the high-speed drawing can be performed; because the horn is cooled in the lubricating liquid, the steel wire is cooled and The lubrication conditions are very good and the quality is guaranteed.www.chinawiredrawingmachine.com