Exhibition

Daily maintenance of straight line wire drawing machine

(1) The overall cleanliness and cleanliness of the equipment, as well as the inspection of pipelines, lines and joints, whether there are any problems, etc.

Reasonable use of frequency conversion technology for wire drawing machine

With the continuous development of frequency conversion speed regulation technology, frequency conversion speed regulators have been widely used in the wire drawing machine industry. They are responsi

The wire drawing machine makes the metal wire production meet the standard

The metal wire drawing machine is an important equipment for the production of metal wire rods. It belongs to the pre-processing equipment for the production of metal products such as standard parts.

Safely operate the wire drawing machine

The electrical equipment of the wire drawing unit must be well grounded, and the two limit screws of the stroke striker must be complete; during operation, it is forbidden to touch the handwheels, han

Brief description of the technology adopted by the wire drawing machine

Comparing the two methods, the effect of large-scale flat surface treatment is better, with uniform lines and uniform lines, but it can only be used for flat plates, and the application range is relat

Safety technology of straightening and cutting machine

Ann when loading receiving frame, should be aligned with the center line of the spout holder receiving the guide tube, and the straight centerline adjustment hole in the cutter. After installation, fi

Operating procedures for straightening and cutting machine

Applicable models: ПO-6 , W58-16 , W58-6.3 , W51-63 , 4544 . 1. Conscientiously implement the relevant provisions of the "General Operating Regulations for Forging Equipment". Second, additional provi

The working principle of the straightening and cutting machine

The speed is increased by the motor through the belt drive, so that the straightening cylinder rotates at a high speed, the steel bar passing through the straightening cylinder is straightened, and th

The functional characteristics of the straightening and cutting machine

The straightening and cutting machine is a machine used to straighten and cut steel bars with a diameter of 14 mm or less. The cutting length can be customized according to customer requirements.

Straightening and cutting machine configuration device

1. Cut-off part : This part of the main motor drives the hydraulic pump station through electromagnetic reversing and overflow valve control. The reciprocating stroke of the movable upper knife assemb

Wire rod straightening and cutting machines structure

The eccentric mechanism is composed of a main shaft, a sliding block, an eccentric wheel, a rocker arm, and a punch. Its power is driven by a cutting motor to rotate the main shaft through a V-belt dr

Wire straightening and cutting machine performance

Wire straightening and cutting machine— consisting of straightening roller, straightening press block, and bearing seats at both ends, complete the straightening of the wire. Its power is a motor inst